- Home
- Equipment
Refine by
Singer Valve Environmental Equipment & Supplies
90 equipment items found
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The Internal Drop Check (IDC) ensures quick positive shut-off whenever normal forward flow stops, this action will prevent reverse flow while reducing surge events. The IDC assembly is a spring assisted, silent, mechanical check option for standard Singer main valves and comes in sizes ranging from 2 in / 50 mm – 36 in / 900 mm. The IDC is a standard feature on the 106-PTC and 206-PTC ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-A-Type 2 altitude control valves are based on the 106-PG main valve, and are ideal for maintaining a preset maximum water level. The valve functions as a two-position control valve, either fully open or fully closed. The Type 2 valve allows normal forward flow to fill the storage tank to the maximum level and then closes drip-tight at the set-point. It opens to refill the tank once the ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The Singer model 106-F-Type 4 modulating float valves are based on the 106-PG main valve. They are ideal for balancing the inflow and outflow demand into the storage tank and maintaining level at the designated maximum. The valve closes drip-tight at the maximum level and modulates to maintain the tank level. The float pilot is remotely installed at the high level in the storage tank. Pilot ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The EPC is a single process loop controller designed to complement the Singer Model 2SC-PCO Dual Solenoid Control Valve. Range of application is dependent on the process variable (feedback) transmitter used, which includes (but not limited to) common automatic control valve functions with conventional ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-AC series control valve is designed to solve high pressure drop problems by allowing smooth control and protection from cavitation damage. It’s ideal for applications where large pressure differentials preclude the use of standard automatic control valves and varying flows make orifice plates ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
Singer Model 106 EPDV-A-10506A Pneumatic/Electric Solenoid control valve is based on the Singer Model 106 PG-UL Deluge main valve. The solenoid pilot provides on-off position operation. The solenoid, using an independent air supply, either admits inlet pressure into the main valve operating chamber from the inlet of the main valve via a high capacity relay valve or releases pressure from the ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
Singer Model 106 EDV-A-10507A Electric Solenoid control valve is based on the Singer Model 106 PG-UL Deluge main valve. The solenoid pilot provides on-off position operation. The solenoid either admits inlet pressure into the main valve operating chamber from the inlet of the main valve via a high capacity relay valve or releases pressure from the relay valve and therefore the main valve ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
For use with grooved Iron Pipe Size (IPS) Pipe Coupling Products, grooved ends allows you to benefit from the simplicity and convenience of grooved end piping and fittings in an automatic control valve. There are a wide range of applications where grooved ends are relevant, but typical applications include municipal water, waste water, fire protection and ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
Yellow metal components such as Brass, Bronze and Copper may not be acceptable materials in harsh water conditions or in specific specifications for a variety of reasons. All or any portion of yellow metals in the internals of main valves may be upgraded to stainless steel. All or any portion of yellow metals on pilots or pilot tubing and fittings may also be upgraded to stainless ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-BPC and 206-BPC booster pump control valves are installed in-line, directly downstream of the pump discharge. The pump control valve is normally closed and on pump start-up, a pilot solenoid is energized to open the valve, at a rate governed by the opening speed control. When shut-down is required the pilot solenoid on the valve is de-energized to commence closing. The pump is kept ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-RPS and 206-RPS pressure sustaining valves are based on the model 106-PG or 206-PG main valve. The 81-RP pilot senses the upstream pressure through a connection to the valve inlet. The valve and pilot remain closed until the inlet pressure exceeds the pilot ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-RPS-L&H and 206-RPS-L&H anticipating surge relief valves are based on the 106-PG or 206-PG main valve. The valve is mounted in a tee, downstream of the pump check valve(s). It is designed to anticipate surges to avoid the severe water hammer often associated with power failure ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-RPS-RR and 206-RPS-RR surge anticipating relief on rate of rise valves are based on the 106-PG or 206-PG main valve. The valve is installed downstream of the pump check valve(s) and has two pilots, the 81-RP and the 81-RPD. Both pilots sense pressure through a connection to the header pipe. The 81-RP high pressure pilot acts as a standard relief pilot, opening on excessive pressure. The ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The A106-Dynamic Lifter (DL) sewage pressure relief valve is a direct acting spring loaded relief valve. The valve is adjusted to open when the pressure exceeds the set-point, which is approximately 10% above the normal operating pressure. The valve closes drip-tight when pressure falls below the set-point. The DL is connected on a tee off the main line and usually discharges relief flow back to ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The Model A106-DL-Air is a compact sewage relief valve that is suitable for high pressures up to 200 psi / 13.8 bar, responds very quickly and retains all the features and benefits of the Model A106-DL Spring–Hydraulic version. It is an attractive solution to what may be otherwise a difficult application due to higher pressures or space height limitations. The Model A106-DL-Air-ET retains ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-PG-BPC or 206-PG-BPC booster pump control valve is installed in-line directly downstream of the pump discharge. The valve is normally closed, and, on pump start-up, a pilot solenoid is energized to slowly open the valve, at a rate governed by the opening speed control. The pipeline flow is gradually ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-PR and 206-PR series pressure reducing valves are based on the 106-PG or 206-PG main valves. The pilot valves sense the downstream pressure through a connection at the valve outlet. Under flowing conditions, the pilot reacts to small changes in pressure to control the valve position by modulating the pressure above the diaphragm. The downstream pressure is maintained virtually steady at ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-PR-SM and 206-PR-SM series control valves are engineered to be used anywhere pressure reducing valve failure is unacceptable. These valves have a second and independent operating system superimposed upon the standard primary system. With the assurance of a back-up system, maintenance schedules may be extended as pressures will continue to be controlled even in the event of failure with ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-PFC / 206 PFC Pressure Modulation Valve is a pressure reducing valve with a special (Patented) pilot that increases downstream pressure as flow increases. The PFC valve alters and controls pressure with flow to create virtually constant pressure at the critical pressure point in a system. It will also automatically adjust for distribution friction losses. The PFC valve will deliver ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-PR-R and 206-PR-R pressure reducing and pressure sustaining valves are based on the 106-PG or 206-PG main valve with the addition of the sustaining pilot 81-RP and pressure reducing pilot PR-160. Provided the upstream pressure setting is satisfied, the 81-RP pilot is kept open, permitting the valve to be controlled by the 160 pilot. The 160 pilot senses downstream pressure and under ...